BADA HI-FI EUROPE

via pediano 3a 40026 imola italy

tel ++ 390 542 600108 mobile ++ 390 347 6906801

email info@badahi-fi.it

Product Name:PH-32 tube power amplifer

Model:PH-32

Brief: The appearance of amplifier is lovely, tube input,tube amplify, MOSFET power output.

*Tube input

*Tube amplification

*Tube drive

*MOSFET but output

Vivid interpretation,charming sound
Mini-quality, modern style

Introduction:

After Bada tube high fidelity series amplifier be promoted to the market ,they gain favor and high opinion from. This machine adopts the design concept of ube high fidelity, using un-conventional classic tube-exposed design, designment is beautiful,music playback is charming and sweet, especially suit to be placed in the bedroom or hi grade multi-media music.

The machine use tube from the input to voltage amplification and current drive, power amplifier use high-power voltage-controlled FET, both have excellent music features, the details is clear, music is rich and balance, especially listen well.

Tube is 6SN7, with a good driving force, combine with field effect transistor, tube circuit also uses a low resistance parallel voltage regulated power supply, circuit make the linearity of circuit be better, more balanced frequency response, FET using famous Toshiba J200/K1529, low-frequency is stronge and music is rich,also use ALPS potentiometers and France advanced high-grade Solen capacitors. Music signal from input to output runs short-cut, so the loss of music is the smallest and more dynamic.

PH-32 mini power amplifier: use high-power ring power supply to supply, filter capacitor’s capacity is 18800uF, abundant energy. Although the power amplifier output power is only 50W +50 W (8Ω), but has enough strong amp current output, even can promote floor stand speakers. (Speaker’s sensitivity  not less than 87dB)

Music’s has rich tube taste, enchanting sound, sound’s balance, broad sound field, quiet, beautiful,it is a delicate and moving mini-amplifier.

PH-32 use manual:

1, PH-32 voltage amplification and promote stage use tubes, it is necessary to work up for about dozens of seconds, until the tube come into the normal working state,then adjust the volume to a appropriate position. (Please place the volume to a minimum value when trun on the machine)
2, After PH-32 work normally,when the circuit is protected, the arrow indicator of source will stop flashing, at this time to immediately shutdown,reboot after troubleshooting.
3, properly use the machine, could avoided some operation failures, re-opening three minutes after shut down power, or continues shutdown,open

Will speed up the aging of components such as MOSFET tube and tube;When serious may breakdown or damage the components.
4, the tube cage of the machine:
For one thing, to prevent high-temperature injury accident, and secondly to protect the tube. If these questions can be guaranteed will not happen, tube cage can be removed, installed in the back of the transformer, this time,the appearance of this machine is more concise, elegant, charming and delicate.
5, PH-32 replay music sweet and charming,sound is mellow and balance. Speaker is also need to match PH-32, the best is use small bookshelf speaker, sensitivity should more than 87dB, load power between 20W ~ 120W. Applicable to small rooms, bedrooms and study, computer rooms to enjoy elegant music. Combination with higher sensitivity (eg, ≥ 88dB)high-end floor standing speakers, also has an extraordinary performance, flexible low-frequency,intermediate frequency is sweet, worth to hear for a hundred times.
6, PH-32 power amplifier has mini appearance,adapt to a wide range of sources, such as the high-quality CD combined with listening machine, as well as radio, multimedia computers, compact MP3, portable CD player, etc. all can be used as sources. Especially multi-media computers with a strong taste of digital, MP3 audio sources, the sound is mellow and beautiful after playback by PH-32.

Specifications: PH-32:
Recommended Speaker sensitivity: ≥ 87dB
Rated output power: 50W +50 W (8Ω)
Frequency response: 10Hz ~ 50kHz (+0,-1dB)
Harmonic distortion: 0.1%
Gain: 35dB
SNR: 90dB (A weighted)
Maximum power consumption: ≤ 200W
* Power output tube is in Class A work stage,case with a high temperature is normal!

Special Note!You have to reboot the machine 10 minutes after shutdown. If you want to replace the tube, and it only can be carried out 10 minutes after be turned off ,or else,it may cause damage to power amplifier.

Product Name:PH-31

Model:MP3 amplifier

Brief: PH-31 mini amplifier

Perfect combination of Classical modern

Bada PH-31 Mini audio power amplifier is newly designed for MP3 players, gain acclaim from businessmen from domestic and overseas,the original version is PH-32,through optimizing and improvement. The preamp uses professional audio module, the classic is classic and elegant,fashional function,advanced. The music playback is sweet and charming, especially suit to be place in the bedroom or mp3 players to enjoy the elegant music .

PH-32 uses special designed MP3 decoder circuit, decoder chip adpot Japan ROHM microelectronics Group special chip, can quickly read the information in U disk or MP3 cell phone. Using tube 6SN7, big power, rich tube taste ,just effectively filter out the MP3 digital signal,make the musci sweet.Input choose three sets of conversion relays, music signal runs short-cut from input to output, make the loss of music the smallest, music is more dynamic and contain richer information.

Specifications: PH-31:
Rated output power: 35W +35 W (8Ω)
Frequency response: 40Hz ~ 18kHz (± 2dB, treble, bass on the state 0dB)
Harmonic distortion: 0.3% (30W 1kHz)
Signal to noise ratio: ≥ 77dB (A standard)
Maximum power consumption: ≤ 200W

Product Name:Integrated audio power amplifier

Model:PH-30

Fashion • Personality • Modern • taste

Introduction:
• use high-tech audio-specific modules to make integrated music amplification channel, circuit performance is very good, with the ability to restore the real music.
• the circuit layout is very tight to minimize unnecessary access for music signal,almost no signal loss from input to output,the details of music reproducted to the real, restore the beautiful music.
• use high efficiency super-mini toroidal transformer,use sufficient material for power supply, the output power is up to 30W +30 W, can easily promote high-quality bookshelf speakers
• beautiful appearance, exquisitely and charming.

Applications:
1, for computer music,can restore very relaxed and lively music, make your work more interesting and efficient.
2, for the bedroom and study, with a pair of good quality bookshelf speakers and a sound source, can make a set of high-performance Hi-Fi system,bring your family more warmth and romance.
3, For upgrade of mini audio combination,enhance the sound effects, little investment,big efficacious.
4, with three PH-30 and a DVD with built-in decoder,it can combine a 1 set of 5.1 Hi-Fi, AV Center.

Output power: 30W +30 W (8Ω)
Distortion: ≤ 0.1% (1kHz 20W)
Frequency Response: 20Hz-20kHz (± 1dB)
Signal to noise ratio: ≥ 85dB (A standard)

Product Name:Hi-end earphone amplifier

Model:PH-12

Brief: Single-ended Class A output perfect tone color

*Tube input

*Tube amplification

*Tube drive

*MOSFET but output

Vivid interpretation,charming sound
Mini-quality, modern style

Introduction:

After Bada tube high fidelity series amplifier be promoted to the market ,they gain favor and high opinion from. This machine adopts the design concept of ube high fidelity, using un-conventional classic tube-exposed design, designment is beautiful,music playback is charming and sweet, especially suit to be placed in the bedroom or hi grade multi-media music.

The machine use tube from the input to voltage amplification and current drive, power amplifier use high-power voltage-controlled FET, both have excellent music features, the details is clear, music is rich and balance, especially listen well.

Tube is 6SN7, with a good driving force, combine with field effect transistor, tube circuit also uses a low resistance parallel voltage regulated power supply, circuit make the linearity of circuit be better, more balanced frequency response, FET using famous Toshiba K1529, low-frequency is stronge and music is rich,also use ALPS potentiometers and France advanced high-grade Solen capacitors. Music signal from input to output runs short-cut, so the loss of music is the smallest and more dynamic.

PH-32 Hi-end earphone amplifier: The output adopt low voltage,high current design,and is single-ended Class A output,no switch distortion,have the beautiful tone color and outstanding driving force.Enjoy fairsounding music,PH-12 is the first choise for Hi-end earphones.

In additional,we offer external option function of high-low impedance.The impedance range for earphone suit for PH-12 is:30Ω~600Ω.

Music is rich in tube taste, enchanting sound, balance sound, sound field is wide, quiet, beautiful sounds, is a delicate and moving mini-amplifier.

PH-32 use manual:

1, PH-32 voltage amplification and promote stage use tubes, it is necessary to work up for about dozens of seconds, until the tube come into the normal working state,then adjust the volume to a appropriate position. (Please place the volume to a minimum value when trun on the machine)
2, properly use the machine, could avoided some operation failures, re-opening three minutes after shut down power, or continues shutdown,open

Will speed up the aging of components such as MOSFET tube and tube;When serious may breakdown or damage the components.
3, the tube cage of the machine:
For one thing, to prevent high-temperature injury accident, and secondly to protect the tube. If these questions can be guaranteed will not happen, tube cage can be removed, installed in the back of the transformer, this time,the appearance of this machine is more concise, elegant, charming and delicate.
4, PH-32 power amplifier has mini appearance,adapt to a wide range of sources, such as the high-quality CD combined with listening machine, as well as radio, multimedia computers, compact MP3, portable CD player, etc. all can be used as sources. Especially multi-media computers with a strong taste of digital, MP3 audio sources, the sound is mellow and beautiful after playback by PH-32.

Specifications:
Recommended Speaker impedance: 30Ω~600Ω
Rated output power: 1W (47Ω)
Frequency response: 10Hz ~ 50kHz (+0,-1dB)
Harmonic distortion: 0.6%
Gain: 16dB
SNR: 95dB (A weighted)
Maximum power consumption: ≤ 50W
* Power output tube is in Class A work stage,case with a high temperature is normal!

Special Note!You have to reboot the machine 10 minutes after shutdown. If you want to replace the tube, and it only can be carried out 10 minutes after be turned off ,or else,it may cause damage to power amplifier.

thousands of peoples are satisfied, listen their favorable music with our audio hi-fi equipments